LoRa6100Pro : 1W Long Range LoRa Module With Uart AES Encryption Mesh Network And ESD Protection

The LoRa Pro module is a new series of upgraded networking LoRa modules from Wireless. It adopts Semtech's SX127X chip.
In order to meet the application needs of different customers, we design the module software of this series as an all-in-one way. Users can switch between different working modes through the PC software configuration module. In MESH mode, the routing module has automatic routing. Function, the user can form a network transmission without blind zone without distance limitation by means of multi-module combination. At the same time, users can also encrypt AES128 wireless data through PC software or serial port instructions, making data transmission more secure.
The LoRa module LoRa6100Pro is designed for 1w output power and is available in TTL/RS232/RS485 levels. It is widely used in wireless remote transmission control.
LoRa6100Pro strictly uses lead-free process for production and testing, and meets RoHS and Reach standards.
Note: The LoRa Pro series can be configured to be compatible with our previous uart LoRa modules.
Hardware Features:
1. Small size, long-distance.
2. Built-in hardware anti-crash self-reset circuit to resist strong external interference signals.
3. Built-in overcurrent and overvoltage reverse connection protection circuit.
Software Features:
AES128 data encryption method.
LBT (Listen Before Talk) function is optional.
Node/route/node+route optional in MESH mode.

DOWNLOAD

Note: The module is internally regulated by 3.3V LDO. The CS pin and SET pin control are 3.3V levels. TXD and RXD are also 3.3V levels.

Features of LoRa module LoRa6100Pro

Pin No.	Definition	Description
1	VCC	Connected to the positive power supply (typical 5V)
2	GND	Connected to ground
3	TXD/A	connect to A@485
4	RXD/B	connect to B@485
5	SET	Configuration parameter enable (low level enable parameter configuration, default high level output)
6	CS	Module enable pin (built-in pull-up) Note: Default factory version: sleep current <200uA, CS pulled high or suspended for normal communication, sleep at low level; Low power consumption version: sleep current <15uA, normal communication when CS is pulled low, pull high or float to sleep.