LoRa600PRO 100mw LoRa dual-antenna Wireless Transceiver Data Transmission Module

The LoRa Pro module is a new series of upgraded networking wireless communication modules from Wireless. It is based on Semtech's SX127X chip and uses advanced LoRaTM spread spectrum modulation frequency hopping technology to achieve high sensitivity. The penetrating power and communication distance are far superior to the current FSK and GFSK products, and have stronger anti-interference. In order to meet the application needs of different customers, we design the module software of this series as an all-in-one way. Users can switch between different working modes through the PC software configuration module. In MESH mode, the routing module has automatic routing. Function, the user can form a network transmission without blind zone without distance limitation by means of multi-module combination. At the same time, users can also encrypt AES128 wireless data through PC software or serial port instructions, making data transmission more secure.

LoRa600Pro adds a dual-antenna design on the basis of LoRa610Pro, which separates the transmitting antenna from the receiving antenna to better meet the needs of specific applications. The module is designed with an output power of 100mw, and the embedded small-size design can be widely used in industries such as wireless remote transmission control.

Note: The LoRa Pro series can be configured to be compatible with our previous LoRa data transmission modules.

Password ×


 Dual antenna design

 AES128 data encryption method

 No blind zone without distance limitation

 Single module open transmission distance of 5Km @ low rate

 Operating frequency band: 433/470/868/915 MHz optional

 Up to 40 communication channels in the same frequency band

 Diversified serial port parameters

 Operating voltage range: 3.3 ~ 6.5 V

 LBT (Listen Before Talk) function optional

 Node/route/node+route optional in MESH mode

 Built-in hardware reset protection circuit

 LORA modulation mode, TTL level

 Sensitivity up to -139 dBm

 Maximum output power: 100 mW (+20 dBm)

 Operating temperature range: -40 ~ +85 °C


 Remote control                             

 Remote meter reading

 Industrial data collection

 Home automation telemetry

 Wireless data communication

 Access control system


Electrical Characteristics

Note: The module is internally regulated by 3.3V LDO. The CS pin and SET pin control are 3.3V levels. TXD and RXD are also 3.3V levels.

Remark: If you need lower sleep power consumption, please contact us to send the “sleep current = 15uA” version.

function description

Block Diagram

Pin & Dimension

Pin definition

Mechanical dimension(Unit: mm)